Jump to content
Mechanical Engineering
  • Blog

About this blog

Centrifuge: It is used in Oil & Gas as well as Pharmaceutical, food, fertilizer industries for solid liquid separation, working principal of separation due to centrifugal force.

I want to know about design and testing standard for centrifuge, can anybody help me on that.

Entries in this blog

 

Governor for turbine

The main functions of the governing system of a large turbine-generator unit used for electricity production via an extensive power network are: To contain the speed rise within acceptable limits should the unit become disconnected from the load. To control the steam valve positions (and hence the load generated) in response to signals from the operator, or from a separate station automatic control system. To control the initial run-up and synchronisation of the machine.

parsottam

parsottam

 

positive displacement

what is called positive displacement? where the term positive displacement is applicable? Is there is any other term for positive displacement? Where it is beneficial over there opposites?   everyone to answer about above...

parsottam

parsottam

 

type of gearbox

What are the different type of gear box? What are the different between general purpose and special purpose gearbox? what are the safety feature for gearbox in hazardous area?

parsottam

parsottam

 

can centrifugal pump handle gas with liquid?

Triple-volute centrifugal pump can handle up to 20 percent entrained air, where a typical centrifugal pump can only deal with air entrainment levels of 5 to 8 percent. Along with entrained air, cavitation is a top candidate for causing pump problems. Cavitation occurs when the pump’s internal pressures are lower than the vapor pressure of the liquid which results in rapid vapor formation within the pump which collapse as the liquid is swept into the higher pressure regions of the pump.

parsottam

parsottam






×
×
  • Create New...