Jump to content
Mechanical Engineering Community

Standards and Manuals

27 files

  1. Standards

    Industry standards for best prectice

    62 downloads

    Submitted

  2. IBC 2009

    International Building Code 2009

    11 downloads

    Submitted

  3. AWS D1.1/D1.1M:2015

    AWS D1.1/D1.1M:2015
    Structural Welding Code — Steel

    55 downloads

    Submitted

  4. AISC Steel Design Guide 21: Welded Connections—A Primer for Engineers

    AISC Steel Design Guide 21: Welded Connections—A Primer for Engineers

    56 downloads

    Submitted

  5. AISC Steel Design Guide 01: Base Plate and Anchor Rod Design

    AISC Steel Design Guide 01: Base Plate and Anchor Rod Design

    33 downloads

    Submitted

  6. Normas Técnicas Complementarias para Diseño por Viento

    Normas Técnicas Complementarias para Diseño por Viento
    Complementary Technical Norms for Wind Resistant Design

    8 downloads

    Submitted

  7. SNiP 2.01.07-85

    SNiP 2.01.07-85
    Loads and Effects

    5 downloads

    Submitted

  8. AS/NZS 1170.2: 2002

    Structural Design Actions
    Part 2: Wind Actions

    5 downloads

    Submitted

  9. MS 1553: 2002

    MS 1553: 2002
    CODE OF PRACTICE ON WIND LOADING FOR BUILDING STRUCTURE

    3 downloads

    Submitted

  10. ACI 318M-11

    Building Code Requirements for Structural Concrete (ACI 318M-11)
    An ACI Standard and Commentary
     

    2 downloads

    Updated

  11. Macau Wind Code 2008

    Macau Regulamento de Segurança e Acções em Estruturas de Edifícios e Pontes
    Wind Action Revision (Consultation Document)
    Revision of Chapter III - Wind Action - of Regulamento de Segurança e Acções em Estruturas de Edifícios e Pontes (RSAEEP), Macau 2008
    [Version - 15th of April, 2008]

    3 downloads

    Updated

  12. GB50009-2001-Code for Loads Design

    GB50009-2001-Code for Loads Design
     

    13 downloads

    Updated

  13. IS 875 Part 3

    IS 875 Part 3: Wind Loads 
    Rev. 1997

    1 download

    Updated

  14. Code of Practice on Wind Effects in Hong Kong 2004

    Code of Practice on Wind Effects in Hong Kong 2004

    4 downloads

    Updated

  15. Eurocode 1: Actions on structures

    Eurocode 1: Actions on structures —
    Part 1-4: General actions — Wind actions

    3 downloads

    Updated

  16. ASCE 7-10

    ASCE 7-10
    Minimum Design Loads for Buildings and Other Structures

    7 downloads

    Updated

  17. ASME Section VIII Division 1

    ASME BPVC Section VIII - Rules for Construction of Pressure Vessels
    ASME Section VIII Division 1
     
    Subsection A - General Requirements
    Part UG - General Requirements for All Methods of Construction and All Materials
    Materials: UG-4 through to UG-15
    Design: UG-16 through to UG-35
    Openings and Reinforcements: UG-36 through to UG-46
    Braced and Stayed Surfaces: UG-47 through to UG-50
    Fabrication: UG-75 through to UG-85
    Inspection and Tests: UG-90 through to UG-103
    Marking and Reports: UG-115 through to UG-120
    Overpressure Protection: UG125 through to UG-140
    Subsection B - Requirements Pertaining to Methods of Fabrication of Pressure Vessels
    Part UW - Requirements for Pressure Vessels Fabricated by Welding
    General: UW-1 through to UW-3
    Materials: UW-5
    Design: UW-8 through to UW-21
    Fabrication: UW-26 through to UW-42
    Inspection and Tests: UW-46 through to UW-54
    Marking and Reports: UW-60
    Pressure Relief Devices: UW-65
    Part UF - Requirements for Pressure Vessels Fabricated by Forging
    General: UF-1
    Materials: UF-5 through to UF-7
    Design: UF-12 through to UF-25
    Fabrication: UF-26 through to UF-43
    Inspection and Tests: UF-45 through to UF-55
    Marking and Reports: UF-115
    Pressure Relief Devices: UF-125
    Part UB - Requirements for Pressure Vessels Fabricated by Brazing
    General: UB-1 through to UB-3
    Materials: UB-5 through to UB-7
    Design: UB-9 through to UB-22
    Fabrication: UB-30 through to UB-37
    Inspection and Tests: UB-40 through to UB-50
    Marking and Reports: UB-55
    Pressure Relief Devices: UB-60
    Subsection C - Requirements Pertaining to Classes of Materials
    Part UCS - Requirements for Pressure Vessels Constructed of Carbon and Low Alloy Steels
    General: UCS-1
    Materials: UCS-5 through to UCS-12
    Design: UCS-16 through to UCS-57
    Low Temperature Operation: UCS-65 through to UCS-68
    Fabrication: UCS-75 through to UCS-85
    Inspection and Tests: UCS-90
    Marking and Reports: UCS-115
    Pressure Relief Devices: UCS-125
    Nonmandatory Appendix CS: UCS-150 through to UCS-160
    Part UNF - Requirements for Pressure Vessels Constructed of Nonferrous Materials
    General: UNF-1 through to UNF-4
    Materials: UNF-5 through to UNF-15
    Design: UNF-16 through to UNF-65
    Fabrication: UNF-75 through to UNF-79
    Inspection and Tests: UNF-90 through to UNF-95
    Marking and Reports: UNF-115
    Pressure Relief Devices: UNF-125
    Appendix NF: Characteristics of the Nonferrous Materials (Informative and Nonmandatory)
    Part UHA Requirements for Pressure Vessels Constructed of High Alloy Steel
    General: UHA-1 through to UHA-8
    Materials: UHA-11 through to UHA-13
    Design: UHA-20 through to UHA-34
    Fabrication: UHA-40 through to UHA-44
    Inspection and Tests: UHA-50 through to UHA-52
    Marking and Reports: UHA-60
    Pressure Relief Devices: UHA-65
    Appendix HA: Suggestions on the Selection and Treatment of Austenitic Chromium–Nickel and Ferritic and Martensitic High Chromium Steels (Informative and Nonmandatory)
    Part UCI - Requirements for Pressure Vessels Constructed of Cast Iron
    General: UCI-1 through to UCI-3
    Materials: UCI-5 through to UCI-12
    Design: UCI-16 through to UCI-37
    Fabrication: UCI-75 through to UCI-78
    Inspection and Tests: UCI-90 through to UCI-101
    Marking and Reports: UCI-115
    Pressure Relief Devices: UCI-125
    Part UCL - Requirements for Welded Pressure Vessels Constructed of Material With Corrosion Resistant Integral Cladding, Weld Metal Overlay Cladding, or With Applied Linings
    General: UCL-1 through to UCL-3
    Materials: UCL-10 through to UCL-12
    Design: UCL-20 through to UCL-27
    Fabrication: UCL-30 through to UCL-46
    Inspection and Tests: UCL-50 through to UCL-52
    Marking and Reports: UCL-55
    Pressure Relief Devices: UCL-60
    Part UCD - Requirements for Pressure Vessels Constructed of Cast Ductile Iron
    General: UCD-1 through to UCD-3
    Materials: UCD-5 through to UCD-12
    Design: UCD-16 through to UCD-37
    Fabrication: UCD-75 through to UCD-78
    Inspection and Tests: UCD-90 through to UCD-101
    Marking and Reports: UCD-115
    Pressure Relief Devices: UCD-125
    Part UHT Requirements for Pressure Vessels Constructed of Ferritic Steels With Tensile Properties Enhanced by Heat Treatment.
    General: UHT-1
    Materials: UHT-5 through to UHT-6
    Design: UHT-16 through to UHT-57
    Fabrication: UHT-75 through to UHT-86
    Inspection and Tests: UHT-90
    Marking and Reports: UHT-115
    Pressure Relief Devices: UHT-125
    Part ULW Requirements for Pressure Vessels Fabricated by Layered Construction
    Introduction: ULW-1 through to ULW-2
    Materials: ULW-5
    Design: ULW-16 through to ULW-26
    Welding: ULW-31 through to ULW-33
    Nondestructive Examination of Welded Joints: ULW-50 through to ULW-57
    Fabrication: ULW-75 through to ULW-78
    Inspection and Tests: ULW-90
    Marking and Reports: ULW-115
    Pressure Relief Devices: ULW-125
    Part ULT Alternative Rules for Pressure Vessels Constructed of Materials Having Higher Allowable Stresses at Low Temperature
    General: ULT-1 through to ULT-5
    Design: ULT-16 through to ULT-57
    Fabrication: ULT-76 through to ULT-86
    Inspection and Tests: ULT-90 through to ULT-100
    Marking and Reports: ULT-115
    Pressure Relief Devices: ULT-125
    Part UHX - Rules for Shell-and-Tube Heat Exchangers
    Part UIG - Requirements for Pressure Vessels Constructed of Impregnated Graphite
    General: UIG-1 through to UIG-3
    Materials: UIG-5 through to UIG-8
    Design: UIG-22 through to UIG-60
    Fabrication: UIG-75 through to UIG-84
    Inspection and Tests: UIG-90 through to UIG-112
    Marking and Reports: UIG-115 through to UIG-121
    Pressure Relief Devices: UIG-125
    MANDATORY APPENDICES: 1 through to 44
    NONMANDATORY APPENDICES: A through to NN

    20 downloads

    Updated

  18. TEMA Standard-9th E

    The Tubular Exchanger Manufacturers Association, Inc. (TEMA) is trade association of leading manufacturers of shell and tube heat exchangers, who have pioneered the research and development of heat exchangers for over sixty years.
    The TEMA Standards and software have achieved worldwide acceptance as the authority on shell and tube heat exchanger mechanical design.
    TEMA is a progressive organization with an eye towards the future. Members are market-aware and actively involved, meeting several times a year to discuss current trends in design and manufacturing. The internal organization includes various subdivisions committed to solving technical problems and improving equipment performance. This cooperative technical effort creates an extensive network for problem-solving, adding value from design to fabrication.
    Whether having a heat exchanger designed, fabricated or repaired, you can count on TEMA members to provide the most current, efficient design and manufacturing solutions. TEMA is a way of thinking--members are not only researching the latest technology, they're creating it.
    For over half a century our main goal has been to continually find innovated approaches to heat exchanger applications. As a result, TEMA members have a unique ability to understand and anticipate the technical and practical needs of today's market.

    Using TEMA members as a resource today ensures a reliable partners for years to come.

    99 downloads

    Submitted

  19. Handbook of Formulae and Constants.

    This PDF contains Constants and other Formulaes of different subjects.. 
    SI Multiples.
    Basic Units (distance, area, volume, mass, density).
    Mathematical Formulae.
    Applied Mechanics.
    Thermodynamics.
    Fluid Mechanics.
    Electricity.
    Periodic Table.

    675 downloads

    Updated

  20. Gear Drive Systems

    Gear Tooth Design
    Gear_Drive_Systems_Design_and_Application_Lynwander_Peter.PDF

    333 downloads

    Submitted

  21. ASME Codes and Standards

    Example of Use for mechanical engineering students

    Source : ASME

    6,324 downloads

    Updated

  22. Engineers pocket guide

    Dear Folks,

    Enjoy with useful Engineers pocket guide

    9,614 downloads

    Updated

  23. Hydrostatic Steering unit Service Manual

    service manual for Hydrostatic Steering unit

    396 downloads

    Submitted

  24. Tolerance Chart

    Tolerance Chart

    467 downloads

    Submitted

  25. Fluid Power Formula

    Fluid Power Formula.pdf , very useful must download it..

    607 downloads

    Submitted



×