Jump to content
Mechanical Engineering
Ilyass Essasnaoui

implementing linear measurment laser sensor

Recommended Posts

good day everyone , 

I am a mechanical engineering student currently having an internship in an automobile adhesive tape company called gergonne , my mission is to  implement a linear displacement laser sensor in an adhesive machine to measure the length of the tape passing through the machine so it can stop once the desired length is achieved , I have already found a couple of sensors that might be suitable for use in this situation like the olv80 from sick and the OADM 20I5481/S14C , but i don't have an idea on how to approach the software used in the machine and to relate between the output of the sensor and the response of the machine ( start / stop once we achieve the desired length of the adhesive tape. 
any help would be greatly appreciated guys , thanks !



Share this post

Link to post
Share on other sites

Looks like you have identified the key items you need to learn in this internship. Now it is up to you to investigate and learn them.


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...