ShivP98 0 Posted February 24 Report Share Posted February 24 Hi everybody I am an undergraduate mechanical engineering student and I am currently working on a project. I need to model the acceleration of a motorcycle from 0-100mph, taking into account road friction and drag friction, the gear ratios, power/torque curve etc. I am completely at a loss on how to do this, so I would appreciate any help I could get with this. It will be a simple flat surface so I just need a "time taken" from 0-100mph. I have the frontal area, wheel radius, power/torque curves against RPM, gear ratios etc. Also the vehicle mass and an estimated drag coefficient. Thanks in advance Quote Link to post Share on other sites

dudleybenton 9 Posted March 2 Report Share Posted March 2 This is a typical example of solving an ordinary nonlinear differential equation. The details can be found in Chapter 1 of my book, Living Math, which you can read (click on "Look Inside") without buying the book. The eBook will be free on March 9th. The method to use is 4th Order Runge-Kutta, explained in Appendix B. The software is free at the link listed in the Forward. Further details can be found in my book, Differential Equations, which will be free on March 4th. The car simulation in Chapter 3 includes rpm, torque, and gear ratios. The calculations are included in the free source code package (car_simulation.c) and a spreadsheet (car_simulation.xls), also free online. There's another example calculating projectile drag. I have attached several files. https://www.amazon.com/author/djamesbenton car_simulation.c car_simulation.xls car_performance.xls 0to60simulation.xls Quote Link to post Share on other sites

ShivP98 0 Posted March 8 Author Report Share Posted March 8 On 3/2/2021 at 9:20 PM, dudleybenton said: This is a typical example of solving an ordinary nonlinear differential equation. The details can be found in Chapter 1 of my book, Living Math, which you can read (click on "Look Inside") without buying the book. The eBook will be free on March 9th. The method to use is 4th Order Runge-Kutta, explained in Appendix B. The software is free at the link listed in the Forward. Further details can be found in my book, Differential Equations, which will be free on March 4th. The car simulation in Chapter 3 includes rpm, torque, and gear ratios. The calculations are included in the free source code package (car_simulation.c) and a spreadsheet (car_simulation.xls), also free online. There's another example calculating projectile drag. I have attached several files. https://www.amazon.com/author/djamesbenton car_simulation.c 3.01 kB · 0 downloads car_simulation.xls 401 kB · 0 downloads car_performance.xls 121.5 kB · 0 downloads 0to60simulation.xls 51.5 kB · 0 downloads Thank you so much. I will have a look at this Quote Link to post Share on other sites

ShivP98 0 Posted March 8 Author Report Share Posted March 8 On 3/2/2021 at 9:20 PM, dudleybenton said: This is a typical example of solving an ordinary nonlinear differential equation. The details can be found in Chapter 1 of my book, Living Math, which you can read (click on "Look Inside") without buying the book. The eBook will be free on March 9th. The method to use is 4th Order Runge-Kutta, explained in Appendix B. The software is free at the link listed in the Forward. Further details can be found in my book, Differential Equations, which will be free on March 4th. The car simulation in Chapter 3 includes rpm, torque, and gear ratios. The calculations are included in the free source code package (car_simulation.c) and a spreadsheet (car_simulation.xls), also free online. There's another example calculating projectile drag. I have attached several files. https://www.amazon.com/author/djamesbenton car_simulation.c 3.01 kB · 1 download car_simulation.xls 401 kB · 1 download car_performance.xls 121.5 kB · 1 download 0to60simulation.xls 51.5 kB · 1 download Hi @dudleybentonI have read that chapter thank you. The bit I am really struggling with is integrating the air resistance and road load resistance into this - could you advise? Thanks Quote Link to post Share on other sites

dudleybenton 9 Posted March 10 Report Share Posted March 10 Resistance (air, road, rolling, drag, whatever) are all forces in the direction opposite of forward motion (i.e., -F). What you're integrating is Newton's 2nd Law or ΣF=d(mV)/dt where F and V are both vectors. In this case there's only one direction so the vector notation isn't necessary and dm/dt is negligible. RK4 (or Euler's method in an Excel spreadsheet) integrates A=ΣF/m=dV/dt and then V=dX/dt. The engine is providing +Power/V less the Drag so that dV/dt=P/V-D. P is a function of rpm, which is a function of V and gear ratio. D is a function of V. Quote Link to post Share on other sites

## Recommended Posts

## Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.