Cole-p 0 Posted July 16, 2019 Report Share Posted July 16, 2019 Hi guys. I'm not an engineer I'm looking for someone to design a wood chipper mechanism like this https://www.youtube.com/watch?v=KxvdaDIsek0 The main difference is it needs to be double shaft with 8 blades instead of 4 which are timed to prevent colission. Also need to allow for the blades to be sharpened every now and again. One other thing is it will be running on a 60hp 1.2 8v engine so it needs to be pretty durable. The engine idles at about 800-1000 rpm so I need to gear that down with pullys to about 120rpm. The goal is to be able to chop sticks with a max diameter of 10cm Looking forward to hearing your replys Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.